36
en | Installing a Wall Mount
8.
NOTICE!
The metal junction box and mounting surface must be capable
of supporting a maximum load of 11.33 kg (25 pounds).
9.
5.1.3
Preparing the Wall Mount for an Outdoor
Installation
The following instructions detail the surface preparations and
the steps to install the Wall Mount for an outdoor application.
1.
NOTICE!
The fasteners and mounting surface must be capable of
supporting a maximum load of 11.33 kg (25 pounds).
F.01U.164.576 | 2.0 | 2010.03
Secure with the appropriate user-provided SEMS screws
that have an integral lock washer to dig through the paint
and ensure an electrical ground connection to the arm
housing or ground lug.
Skip to Section 5.1.4 Installing the Camera to the Mounting
Plate, page 40, to continue the installation.
Determine a secure location for the wall mount (supplied
separately).
280.0
(11.02)
Figure 5.4 Wall Mount Dimensions
Installation Manual
316.7
(12.5)
204.1
(8.0)
203.5
(8.01)
AutoDome Easy II IP
349.7
(13.8)
Bosch Security Systems, Inc.