AutoDome Easy II IP
11.3
Connecting the AutoDome Easy II IP to the
PC
1.
2.
3.
NOTICE!
The AutoDome Easy II IP can also be connected directly to a PC
using an Ethernet crossover cable with RJ45 connectors (see
option B below).
Figure 11.1 AutoDome Easy II IP System Configuration
1
2
3
4
Bosch Security Systems, Inc.
Install the AutoDome Easy II IP according to the
instructions in this manual.
Connect an Ethernet cable from the AutoDome Easy II IP
RJ45 connector to a dedicated network switch to bypass
the Local Area Network (LAN).
Connect the dedicated network switch to the RJ45
connector on the PC (see option A below).
AutoDome Easy II IP
IP Connection
Network Switch
Computer
Installation Manual
Using the AutoDome Easy II IP | en
F.01U.164.576 | 2.0 | 2010.03
77