42
en | Installing a Wall Mount
9.
10. Rotate the camera approximately 15 degrees to the right
F.01U.164.576 | 2.0 | 2010.03
Attach the camera to the mounting plate by inserting the
vertical tab into the recessed slot on the top of the camera
dome to the right of the safety locking screw.
Figure 5.10 Safety Locking Screw
and lock firmly into place, as shown in the next illustration.
Note: Do not loosen brass mounting buttons.
Figure 5.11 Attach Dome to Mounting Plate
Installation Manual
AutoDome Easy II IP
Bosch Security Systems, Inc.