Preventive Maintenance - Bosch VEZ-221-ECCE Installation Manual

AutoDome Easy II IP
16

Preventive Maintenance

The following preventive maintenance schedule allows
detection and correction of minor faults before they become
serious and cause equipment failure. Periodically perform the
following:
–
–
–
–
When cleaning the dome bubble heed these warning:
–
–
–
–
–
Attaching the Bubble
The AutoDome Easy II is shipped with the bubble secured to the
upper housing. Bosch does not recommend removing the
bubble from the housing. If a situation requires you to remove
the bubble, however, you must use a Torx T-10 driver to secure
the three screws on the bubble to the upper housing each with
a torque of 5 in.-lbs.
Bosch Security Systems, Inc.
Inspect all connecting cables for deterioration or other
damage.
Wipe housing with a clean damp cloth.
Clean the dome/windows with an approved P.C (LEXAN)
Cleaner (Novus LEXAN cleaner-plastic polish).
Verify that all the mounting hardware is secure.
Do not use alcohol-based solutions to clean the bubble.
This will cause the bubble to cloud and over time cause
stress aging, which makes the bubble brittle.
Do not use abrasive or highly alkaline cleaners on the
bubble.
Do not scrape the bubble with razor blades or other sharp
instruments.
Do not use Benzene, Gasoline, Acetone, or Carbon
Tetrachloride on the bubble.
Do not clean bubbles in direct sunlight or on very hot days.
Installation Manual
Preventive Maintenance | en 127
F.01U.164.576 | 2.0 | 2010.03