Saving Snapshots; Recording Video Sequences - Bosch VEZ-221-ECCE Installation Manual

AutoDome Easy II IP
11.6

Saving Snapshots

You can save individual images from the video sequence
currently shown on the LIVEPAGE in JPEG format on your
computer's hard drive. The icon for recording single images is
only visible if the unit is configured to enable this process.

11.7

Recording Video Sequences

You can save sections of the video sequence currently shown
on the LIVEPAGE on your computer's hard drive. The icon for
recording video sequences is only visible if the unit is
configured to enable this process.
1.
2.
NOTICE!
You can play back saved video sequences using the Player from
Bosch Security Systems, which can be installed from the
product CD supplied.
Image Resolution
Sequences are saved at the resolution that has been preset in
the configuration for the encoder (see Section 12.4 Basic Mode:
Encoder Profile, page 90).
Bosch Security Systems, Inc.
Click the icon. The image is saved at a resolution of
704 × 576 pixels (4CIF). The storage location depends on
the configuration of the .
Click the icon to start recording. The storage location
depends on the configuration of the AutoDome Easy II IP. A
red dot in the icon indicates that recording is in progress.
Click the icon again to stop recording.
Installation Manual
Using the AutoDome Easy II IP | en
F.01U.164.576 | 2.0 | 2010.03
85