Programming The Inactivity Operation; Recorded Tours - Bosch VEZ-221-ECCE Installation Manual

120 en | Common User Commands (unlocked)
To add or remove scenes to Preposition Tour:
1.
2.
To change the dwell period of a tour:
1.
2.
14.4

Programming the Inactivity Operation

You can program the AutoDome Easy II to automatically change
its operating mode after a period of inactivity.
To access the Inactivity mode (locked command):
1.
2.
3.
14.5

Recorded Tours

The AutoDome Easy II can make up to two (2) recorded tours. A
Recorded Tour saves and then plays back up to 15 minutes of
all manual camera movements made during the recording,
including its rate of pan, tilt and zoom speeds and other lens
setting changes.
To Record Tour A:
1.
2.
To playback Recorded Tour A:
1.
2.
F.01U.164.576 | 2.0 | 2010.03
Press SHOT-900-ENTER to access the Add/Remove
Scenes Menu.
Use the Focus/Iris buttons to add or remove the selected
scene from the tour.
Press ON-15-ENTER to access the Tour Period Menu.
Follow the on-screen instructions.
Press OFF-90-ENTER to turn off the command lock.
Press ON-9-ENTER to access the Inactivity Mode Menu.
Select one of the following choices:
– Return to Scene 1: Returns the camera position back
to the first scene saved in memory.
– Recall Previous Aux: Returns the camera to the
previous operating mode, such as a Preposition Tour.
Press ON-100-ENTER to start recording a tour.
Press OFF-100-ENTER to stop recording.
Press ON-50-ENTER to begin continuous playback.
Press OFF-50-ENTER or move the joystick to stop playback
Installation Manual
AutoDome Easy II IP
Bosch Security Systems, Inc.