System Requirements - Bosch VEZ-221-ECCE Installation Manual

76 en | Using the AutoDome Easy II IP
11.2

System Requirements

The AutoDome Easy II IP requires specific software and
hardware to allow a user to view live images and to configure
camera settings over a TCP/IP network. These requirements
are:
–
–
–
If you choose to use a computer running Microsoft Internet
Explorer or any of the Bosch software, the computer must
conform to the following minimum requirements:
–
–
–
–
–
–
–
–
–
–
–
NOTICE!
Ensure the graphics card is set to 16-bit or 32-bit color. If you
need further assistance, contact your PC system administrator.
F.01U.164.576 | 2.0 | 2010.03
A computer with the Microsoft Windows XP or Vista
operating system, network access, and the Microsoft
Internet Explorer Web browser version 7.0 or later, or
A computer with the Microsoft Windows XP or Vista
operating system, network access, and reception software
such as the Bosch VIDOS software or the Bosch Divar XF,
or
A compatible hardware decoder from Bosch Security
Systems as a receiver and a connected video monitor.
Processor: 1.8 GHz Pentium IV
RAM: 256 MB
Video system: 128 MB video memory, 1024x768 display
with a minimum of 16-bit color
Network interface: 100-BaseT
Microsoft Internet Explorer, version 7.0 or higher
You must install the following software (available on the
Bosch Security Systems, Inc. Web site at
www.boschsecurity.com)
DirectX 9.0c
Java Virtual Machine
MPEG ActiveX utility
.Net 2.0
VideoSDK
Installation Manual
AutoDome Easy II IP
Bosch Security Systems, Inc.