Specifying Tracer Settings - JDS Uniphase HST-3000 User Manual

Chapter 3 ISDN PRA testing
Specifying test settings
Specifying
Tracer settings
64
The following procedure describes how to specify the Tracer
settings.
To specify the Tracer settings
1 Press the Configure
The test configuration soft keys appear.
2 Press the Tracer soft key. You may need to use the left or
right arrow button to find the Tracer soft key.
The Tracer Settings menu appears.
This screen varies, depending on the application (Simula-
tion/Monitor) and which protocol you are using.
3 If you are in the Monitor application, the first item is
Monitor Protocol. Specify whether the monitor protocol
is Euro ISDN or DASS2.
4 Select Layer and then choose whether to filter on a
specific layer.
5 Select All channels and then choose whether to include
all channels or filter on a specific channel.
6 If you selected No for All channels, select Channel value
and specify the channel to filter.
7 Select SAPI and then choose whether to filter on a
specific SAPI.
HST-3000 E1 Testing User's Guide
navigation key.