Viewing LED
statistics
Running a BER
test
The LED result category shows the current and historical
status for alarms.
To view the LED results
– Press the Display soft key and then select LED.
For more information on these results, see
page
149.
After you place or receive calls, you can perform BER analysis
of the associated B channels. In addition to providing general
ISDN results, the HST provides results based on the BER
analysis of the B channels.
To run a BER test
1 With a call active, press the Display soft key and then
select BERT.
The BERT screen appears.
2 Press the Start BERT soft key.
The timer will begin counting and results begin to incre-
ment.
3 Optional. To change the BERT pattern, press the up or
down arrow.
4 Optional. If you have multiple calls active, you can BERT
on a single channel or multiple channels. Press the
Actions soft key and then select a BERT function.
Selection
BERT Single
Channel
BERT Multiple
Channels
HST-3000 E1 Testing User's Guide
Description
BERT on a single channel (only one chan-
nel)
BERT on the multiple channels.
The channel map appears. Choose the
channels using the arrow keys and the OK
key. When finished selecting channels,
press the Commit soft key.
Chapter 3 ISDN PRA testing
Emulating an ISDN phone
"LED results" on
81