Specifying Test Settings; Specifying Isdn Settings - JDS Uniphase HST-3000 User Manual

Chapter 3 ISDN PRA testing

Specifying test settings

Specifying test settings

Specifying
ISDN settings
52
– Tracer (See
page 95)
– Responder (See
page 99)
The test function launches.
Before you begin testing, make sure the test settings on the
HST-3000 match the settings of the line you are testing. The
settings that are available vary depending on the application.
When you configure the HST to place a call, you specify the
settings required to activate the physical layer and initialize
ISDN service over the D channel (ISDN Settings).
To specify ISDN settings
1 Access the test configuration menus. See
test configuration menus" on page 7
step 2.
2 Press the ISDN soft key. You may need to use the left or
right arrow button to find the ISDN soft key.
The ISDN Settings menu appears.
HST-3000 E1 Testing User's Guide
"Tracing D channel messages" on
"Automatically responding to calls" on
"Accessing the
then proceed with