Viewing The Call Status For All Channels; Viewing Layer 2 Status; Viewing Physical Layer Statistics - JDS Uniphase HST-3000 User Manual

Chapter 3 ISDN PRA testing
Emulating an ISDN phone
Viewing the call
status for all
channels
Viewing layer 2
status
Viewing
physical layer
statistics
80
If you wish to view the call status for all channels, from the
PRA Calls menu, press the right arrow. The Call List appears,
which lists the active calls. Press the right arrow again. The
PRA B Channels menu appears.
This menu provides an icon to report the status of each
B channel. If a call is active, the phone icon will be off hook.
If you are using DASS2 protocol, the Layer 2 results reports
the status of layer 2 for each channel.
To view the layer 2 results
– Press the Display soft key and then select Layer 2.
For more information on these results, see
on page 146.
The Interface result category lists results related to the phys-
ical interface.
To view the Interface results
– Press the Display soft key and then select Interface.
For more information on these results, see
on page 147.
HST-3000 E1 Testing User's Guide
"Layer 2 results"
"Interface results"