U2/G.704 Monitor - JDS Uniphase HST-3000 User Manual

U /G.704 Monitor If you are testing using the U
2
2 Connect the other end of the cable to the TE.
S /T
2 2
TE
RX/TX1
port
Figure 21 Connecting as a S
3 With the second cable, connect one end of the test cable
to the RX/TX2 jack on the left side of the module.
4 Connect the other end of the cable to the NT.
The cables are connected.
Figure 22 shows how to connect to the line.
To connect to the line
1 With the first cable, connect one end of the test cable to
the RX/TX1 jack on the left side of the module.
HST-3000 E1 Testing User's Guide
NT
RX/TX2
port
/T
2
/G.704 Monitor application,
2
Chapter 3 ISDN PRA testing
Connecting to the line
Central Office/Switch
U
2
LT
Monitor
2
73