Overview And Options - JDS Uniphase HST-3000 User Manual

Chapter 1 Getting started

Overview and options

Overview and options

Table 6 E1 testing options
Option
Pulse Shape
Analysis
Frame Relay
Primary Rate
ISDN
2
An HST-3000, with E1 testing capability, allows you to perform
the test operations necessary to install, maintain, and trouble-
shoot E1 and n x 64 k E1 circuits. Test operations include in-
service monitoring, bit error rate testing (BERT), loopback
testing, and drop and insert testing.
You can expand your testing capability by purchasing addi-
tional E1 testing options. All test operations using the E1
options are performed from an E1 access point. The options
available for purchase are as follows:.
Description
With this option, you can measure the
peak voltage, width, rise time, fall
time, overshoot, undershoot, and sig-
nal level of an E1 pulse. The HST dis-
plays the measurements and a graph
of the pulse shape. You can also mea-
sure the pulse for conformance to the
G.703 pulse mask.
Allows you to test frame relay ser-
vices. Available for E1, T1, Datacom,
and DDS local loop SIMs.
Allows you to test Primary Rate ISDN
(ETSI).
HST-3000 E1 Testing User's Guide
Order Number
HST3000-PS
HST3000-FR
HST3000-PRI