Table of Contents
Advertisement
VII. Maintenance and t ransport . [also s ee repair p20 ]
As is customary with every mechanism, different points must also be l ubricated here in order to ensure
proper functioning. This is particularly recommended for intensive use. To ensure reliable lubrication,
the amalgamators used in the manufacture are included in the list of parts. These lubricants are suitable
for every clinic.
NO OIL OR FAT ON THE BETWEEN!
Do not spill with oil and grease and make sure that neither oil nor grease gets on the rubber of the
intermediate wheel or on the part of the motor shaft that comes into contact with this wheel. Oil and
grease deform the rubber, ensuring correct operation
............ correct operation of the changer would be affected
.
When transporting the separate unit, as well as when transporting the cabinet, some precautionary
measures must be taken to avoid unnecessary damage. To do this, remove the center pin and prevent
the plate press from sliding up and down in the slot.
The P.U.arm should be fixed to the starting /rest position and it is recommended, the rubber drive
wheel
transport over large distances in the original way, so that no damage to the rubber is to be possible.
Finally, it is of course the best when the separate unit is transported in its original packaging.
In cases where the changer is installed, the unit must be screwed onto the mounting plate in the same
way as on delivery.
......................................................................................................................
.....................................................................................
P10b
VIII REPAIR
The
e xploded view drawings
clearly show how the various components must be assembled
P11a
24
Advertisement
Table of Contents
