Table of Contents
Advertisement
Note:
item 'A' fig 9 secures here [left end ,top] w 2 screws
XII THE TURNTABLE REMAINS RUN AFTER THE PU ARM
IS RETURNED ON THE SUPPORT ON THE HEART SWITCH.
The position of the bracket net roll ( 1 ) is too low. Here, the am of the switch is n ot pushed down
sufficiently. The screw ( 2 ) by turning on the bracket sliding it toward the top. Dearna tighten the screw
again. It should also be taken to ensure that the caster can rotate easily. Add a d rop of oil if necessary .
R13568
55
Advertisement
Table of Contents
