Table of Contents
Advertisement
P6a
9
. The pick-up arm may always be moved manually when it is once on the plate, for example to repeat a
particular passage.
D o not touch the arm when it is moved automatically !
10.
When the mechanism comes into operation ( e ither by ' s tart ' o r ' r eject ' o r a t the end of the
DISC) then there is always a next disc.. If you want to hear the same record/disc again after
and 5,[
B y moving the c ontrol
3 .
unit is in the OFF stopped at the end of the drive. ...
while a disc is moving and then returning the button to its stop position, the disc changer stops
immediately.]
The r epeat button m ust be used. In addition, the repeat button can be prevented from being skipped
when the operation is carried out under maneuvers
d isc changer
The
11.
position of the P.U.unit in connection with the type of grove of the disc.
...................................................................................
VI . Operation of the record/disc changer. TRAINING
The rotating motor is floating through the intermediate wheel [ 4 3 ]
the turntable ( 6 5 ) touched. The intermediate wheel can be m oved along the axis of the motor shaft
with the speed operation knob
knob
to the "off" position, the
is fool-proof on the understanding that extra attention must be paid to the
( A fig.3).
left screw
A
/78
B y pulling the c ontrol
5 .
3 on 5[see above]
and then restarted.
middlescrew
/45 right screw
C
3
button
forward
B /33-1/3
15
Advertisement
Table of Contents
