Service Hints; Repair Positions - Philips HDD100 Service Manual

SERVICE HINTS

REPAIR POSITION COPPERSIDE
To get access to the copperside of the
printed board assembly proceed as follows:
1.Remove screws 2pcs (1.4X4 on the cap assy)
Remove CAP right and left
2.Remove screws 5pcs (1.7x5 on the rear cabinet)
3.Lift battery and copper foil
2 -1
REPAIR POSITION COMPONENTSIDE
To get access to the compomentside of the
printed board assembly proceed as follows:
1.Remove screws 2pcs (1.4X4 on the cap assy)
Remove CAP right and left
2.Remove screws 5pcs (1.7x5 on the rear cabinet)
3.Lift battery and copper foil
4.Remove screws 5pcs(1.4x4 on the PCB assy)