Operation - Philips AG1000 Service Manual

Disc changer
Table of Contents

Advertisement

When the appliance is switched off, after the last plate has finished, the plates can be removed after
removing the plate press[62] ​ a nd​ the center pin.
REPEAT KNOB R.
By pressing this button a played record can be repeated.
Note regarding the dimensions of the gramophone records.
As is known, in this type of changer the thickness of the disc must meet certain requirements. The
thickness​ must be between 1.7 and 2.5 mm, measured in the center hole. The ​ d iameter​ of the center
hole is approx. 7 to 7.5 mm. The exchanger is set so that the normally occurring discs can be used, also
with regard to the outside diameters. Manual operation must be applied for abnormal plates.
[at, which again interrupted ?]
............................ ...... OPERATION....................see operation [ VI ] below...
1 ​
. This disc changer plays up to 10 RECORDS together
of 25 and 30 cm (10 "and 12"). The stacking here may be ​ a rbitrary​ . In addition, 10 plates of 17.5 cm (7 ")
can be played.The entire process is ​ s tarted by putting the ​ c ontrol knob​ ​ ​
after which the knob automatically returns to the rest position after this again is released.
( C fig.3​
) >>forward>> (​ s tart)​ ,
13

Advertisement

Table of Contents
loading

Table of Contents