V . General properties and operation
GENERAL CHARACTERISTICS AND CONTROL
After the center pin is placed in the center hole of the turn table
base of the plate press
use.
Since this changer is suitable for playing normal, as well as micro-groove discs and is more over suitable
for different speeds and disc diameters, the positions of the operating elements w ill first be explained
with the aid of F IG. 3
Speed lever A:
The speed of the turntable is adjusted by setting the speed lever in the relevant position, At 78, 45 and
33 1/3 rpm. M ove the
intermediate wheel (43) from undergoing a DEFORMATION..
D iameter BUTTON B:
( 62)
-) and the pick-up unit is pushed onto the P.U. arm, the device is ready for
w hile the motor is running . This is to prevent the rubber surface of the
t rade
[(see fig. 3)
( 65)
(shoulder in the direction of the
11