Auto Setup; Execution Timing - Casio DT-X7 Series Software Manual

5.2 Auto Setup

This utility automatically sets up a specified application.

Execution Timing

The timing for executing "Auto Setup" is as follows.
• When the terminal is reset;
The utility carries out Setup.exe, Restore.exe in the FlashDisk.
Location of Application for Automatically Starting up with Auto Setup
Location of applications to be automatically set up with this utility is CE\ARM folder of the
FlashDisk.
Customizing in the Registry
Performances of the "Auto Setup" can be automatically customized by changing the parameters in
the following registry.
[HKEY_LOCAL_MACHINE\Drivers\CASIO\UTIL]
Table 5.2
Key
FLSETUP
Notes:
• Once the registry is deleted, the applicable application will not automatically start up.
• The registry will be initialized to its factory setting by performing a full reset on the terminal.
• Since automatic startup of applications with the utility will be performed every time when a
reset is performed on the terminal, it should be avoided by controlling the automatic startup
for each applicable application.
Setting
Value
sz:"1"
Carries out Setup.exe for the FlashDisk at a time of reset on the terminal.
sz:"2" Carries out Restore.exe for the FlashDisk at a time of reset on the terminal.
Description
284