Casio DT-X7 Series Software Manual page 41

2.1.11 Vibrator
Basic Specifications
The vibrator can be set up for five different notifications.
Table 2.22
Notification
Alarm
Warning
Bar code scan complete
Wireless incoming signal
User definition
Vibration Interval
The vibration interval can be set in two different patterns, the default setting and a user defined
setting.
Table 2.23
Pattern
Default
User
definition
SysPlayVibrator function of the System Library can be used to control ON/OFF state for each
occasion of the vibration and the vibration interval in user definition.
The functions of the System Library relevant to the "Vibration Interval" are as follows.
SysPlayVibrator
SysStopVibrator
SysSetVibratorMute
SysGetVibratorMute : Retrieves statuses of all the parameters for the vibrator and individual
Vibration Pattern
Default
Default
Default
Default
User
Vibration Interval
"ON for 1 second, OFF for 1 second" x ?? [times]
"Specified ON period, Specified OFF period" x ?? [times]
Setting range; 1/16 seconds to 16 seconds for ON period,
1/16 seconds to 1 second for OFF period
: Turns on the vibrator.
: Turns off the vibrator.
: Sets up "Enable" or "Disable" for all the parameters for the vibrator and
individual mutes.
mutes.
Setting
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
41
Default
OFF
OFF
OFF
OFF
OFF
Remarks
Maximum no. of times; 20
Maximum no. of times; 20