Basic Features - Casio DT-X7 Series Software Manual

2.7 WLAN
The IEEE802.11b/g WLAN is operable on the models, DT-X7M10R, DT-X7M10R-CN,
DT-X7M10R2, DT-X7M10R2-CN, DT-X7M30R, and DT-X7M30R-CN. The IEEE802.11b/g
standard utilizes 2.4 GHz ISM ("Industry, Science and Medical") frequency band, which is used
for short range wireless communication.
Device Name
With the terminal, the device name used to capture data about the WLAN driver with
DeviceControl function is "PY55BG1".

2.7.1 Basic Features

Roaming
This function automatically switches Access-Point in environment where two or more
Access-Points with identical SSID code exist.
Power Saving
This saves the power by automatically turning off the power to the integrated WLAN module in
the terminal when communicating does not take place.
AdHoc
This operation mode provides a direct communication between wireless equipments without the
use of Access-Point. Note, however, that the AdHoc mode is not recommended to operate because
connection problem may occur.
WEP
This is an encryption that uses RC4 method for safe communication. It supports 40-bit
(64-bit)/104-bit (128-bit).
TKIP
TKIP supports against the weakness of WEP encryption.
AES
Advanced Encryption Standard (AES) is available on DT-X7M10R2, DT-X7M10R2-CN,
DT-X7M30R, and DT-X7M30R-CN for encryption method.
802.1x Security
This can strengthen authentication and establish a safe and reliable communication via WLAN. In
general, this interlinks with TKIP. It supports PEAP-EAP-MS-CHAP-V2, and EAP-TLS.
113