Casio DT-X7 Series Software Manual page 148

Configuration of the Toolbar
Descriptions about each icon in the Toolbar are as follows.
Table 3.8 Icons in the Toolbar
Icon
Returns to the Devices screen.
Displays the main menu.
Displays the multi-menu. The content of the menu differs depending on screen displayed.
When multiple screens are open concurrently, closes the current screen appeared and returns to
the screen one path before.
When multiple screens are open, selects and moves a screen.
Retrieves service information again and updates the list of services.
When establishing a Bluetooth connection using a profile other than OBEX profile and FTP
profile, the icons appeared in the Toolbar in the screen are changed to the icons shown below.
Table 3.9 Icons in the Toolbar
Icon
Displays the main menu.
Displays the multi-menu. The content of the menu differs depending on screen appeared.
Closes the current screen and returns to the services screen. If Bluetooth connection being
established, it will be disconnected.
When multiple screens are open, selects and moves a screen. Returns to the services screen
while the Bluetooth connection is kept established.
Closes the Bluetooth connection. Does not allow the services screen to return.
Establishes Bluetooth connection again once after the Bluetooth connection has been
disconnected.
Configuration of the Menus
The main menu has the same submenus available in the Devices screen. The menus for the
context menu and multi-menu are shown below.
Table 3.10 Context menu/Multi-menu
Menu
Add Shortcut
Use to connect for ActiveSync
Set Default device
Description
Description
Creates a shortcut for specified service, and then adds it to the shortcuts list.
See Chapter 3.1.4 for detail.
Establishes connection in ActiveSync via specified serial port.
Sets up specified service into default device. See Chapter 3.1.5 for detail.
148
Description