Automatically Install Software; Auto Setup - Casio DT-X200 Series Software Manual

3.14 Automatically Install Software

3.14.1 Auto Setup

Place the setup files (Setup.exe, CAB file) into the "FlashDisk¥CE¥ARM" folder to automatically
install them when the system reboots for a unit reset.
The target process, storage location, and execution procedure are as stated below.
Target process
CAB for service pack, individual
patch, etc.
File installation
(For system)
Autorun application
(For individual applications)
[Remarks]
(1) ¥FlashDisk¥CE¥ARM¥Setup.exe is for system use, so do not use it as a user setup
application/
(2) The order of priority for auto install is for systems use -> for individual applications.
Execution procedure for the Auto Setup Tool
1. Copy the setup files into the target folder.
Example) When installing a patch version
Copy Setup.exe and *****.cab into the FlashDisk¥CE¥ARM folder.
FlashDisk
2. Press the reset button on the back of the unit. Setup.exe starts when the system reboots, and
expands CAB files according to the installation procedure.
3. Once all CAB files have been installed, reset the unit again.
4. If there is any user setup application present, use the system setup.exe to perform the following
process.
After using reset to reboot the unit, start the user setup application
"¥FlashDisk¥CE¥¥ARM¥APP¥Setup.exe".
In the ¥FlashDisk¥CE¥ARM folder
Target file format
Setup.exe
*****.cab
In the ¥FlashDisk¥CE¥ARM¥APP folder
Target file format
Setup.exe
CE ARM
164
Storage location
Setup.exe
*****.cab