Casio DT-X7 Series Software Manual page 28

Permit or Prohibit Key Locks
The System Library can be used to permit or prohibit the operations of keys except the Power and
Trigger keys.
The functions of the System Library relevant to the "Permit or Prohibit Key Locks" are as follows.
SysSetAllKeyLock
SysGetAllKeyLock : Retrieves "Enable" or "Disable" status for lock with specified key.
User Settable Keys
• Initiating application
The following registry can be used to assign any application to the Fn+7, Fn+8 and Fn+9 keys.
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
Table 2.8
Key
Fn7LaunchPath sz: Target application in full path to initiate
Fn8LaunchPath sz: Target application in full path to initiate
Fn9LaunchPath sz: Target application in full path to initiate
•
Setting key codes
The System Library can be used to assign any key code to all the keys except the Fn key. Setting
"Enable" or "Disable" for assigning key code is possible using the System Library or at the
Control Panel.
The key codes after setting are valid only when the numeral input mode is set enabled.
The functions of the System Library relevant to the "Setting key codes" are as follows.
SysSetNormalUserDefineKey
SysGetNormalUserDefineKey : Retrieves key codes in normal mode.
SysSetUserDefineKey
SysGetUserDefineKey
: Sets up "Enable" or "Disable" for lock with specified key.
Setting Value
: Sets up key codes in normal mode.
: Sets up user defined keys which are freely issued in either
numeric, hiragana, katakana, alphabets in uppercase, or
alphabets in lowercase mode.
: Retrieves user defined keys.
28