Casio DT-X7 Series Software Manual page 85

2.3.4 Scan Result Notification
The notification of the read completion of a symbol can be posted using one of the following three
integrated devices. The buzzer sound level can be set up at the Control Panel.
Table 2.57
Device
LED
Buzzer
Vibrator
The functions of the Imager Library relevant to the "Scan Result Notification" are as follows.
IMGSetLED
IMGGetLED
IMGSetBuzzer
IMGGetBuzzer
IMGSetVibrator
IMGGetVibrator : Retrieves the notification via vibrator for scanning complete.
Setting Read succeeded
Green and Lit in green
Red
Green Lit in green
Disable None
Enable Sound for
scanning
completion
Disable None
Enable Vibrates
Disable None
: Sets up notification via LED for scanning complete.
: Retrieves the notification via LED for scanning complete.
: Sets up notification via buzzer for scanning complete.
: Retrieves the notification via buzzer for scanning complete.
: Sets up notification via vibrator for scanning complete.
Read terminated
Read failed
(release the Trigger key)
Lit in red
None
None
None
None
None
None
85
Default
None Green and Red
None
None
None Enable
None
None Enable
None