Table of Contents
Advertisement
LEVEL
BARWIDTH
MARGINCHECK
LEARINING
Notes:
1. To set up multiple bar code symbologies effect, specify a sum of each value of the symbologies
you wish to scan.
2. To set multiple scan trigger keys effect, specify a sum of each value of the keys you wish to
set.
3. To set up multiple notification modes effect, specify a sum of each value of the notification
modes you wish to set.
4. To set up multiple output methods effect, specify a sum of each value of the output methods
you wish to set. However, if you set "EAN128 without Full ASCII conversion", "EAN128 with
code ID attached", and "EAN128 Fnc → GS conversion" effect at same time, "EAN128
without Full ASCII conversion" will have the priority over the other settings. Thus, the settings
will be disabled.
5. Since Gun-trigger key is not integrated in the terminal, the key value is ignored.
6. A.I. is the abbreviation of Application Identifier which is attached at the forefront of bar code
of RSS-14, RSS-Limited and RSS-14 Stacked symbologies.
7. The RSS symbologies change its name to "GS1 DataBar".
RSS-14 → GS1 DataBar Omnidirectional
RSS Limited → GS1 DataBar Limited
RSS Expanded → GS1 DataBar Expanded
RSS-14 Stacked → GS1 DataBar Stacked
RSS Expanded Stacked → GS1 DataBar Expanded Stacked
8. EAN-128 symbology changes its name to "GS1-128".
9. Setting up the scan width control function in one of four modes while the setting gain is set up
in Auto mode may cause a deterioration of scanning bar codes that are printed in a poor quality.
If you need to set up the scan width control function, select the setting gain in Mode 0 to Mode
3. Or, if you select the setting gain in Auto mode, select the scan width control function in "No
control on laser beam emission width" mode only
Setting decode level
Setting correction value
of thickness of bars
Setting threshold values
for right and left margins
Setting learning mode
71
0
1
0:
Standard level
1
1:
High level (dual decode
system)
0
0
0:
No correction
1
1:
Thin black bar
2
2:
Thin black bar (or thicken
black bar)
3
3:
Thin white bar
4
4:
Thin white bar (or thicken
white bar)
0
0
0:
Maximum
1
1:
Middle
2
2:
Narrow
3
3:
Minimum
0
0
0:
Disable
1
1:
Enable
Advertisement
Table of Contents
