Casio DT-X7 Series Software Manual page 32

FlashDisk
The terminal integrates a 64MB Flash ROM and it is used for the following purposes.
Contrary to RAM disk, content in the FlashDisk is not volatile. Any important data you do not
wish to loose must be stored in this disk. The Storage Manager at the Control Panel conducts
formatting the FlashDisk and control of it.
Boot area
Compressed OS image
The rest of the OS image
User disk
: Boot Loader which loads the OS to RAM is stored here.
: Upon start up the terminal, the Boot Loader will decompress the OS
and load to RAM.
: "Execute In Place (XIP)" portion of the OS such as Compact
Framework 2.0 is stored here.
: User area that users can use freely as disk. The initial sizes are as
follows:
DT-X7M10U, DT-X7M10E, -CN, DT-X7M10R, -CN
DT-X7M10R2, -CN
DT-X7M30E, -CN, DT-X7M30R, -CN
32
28.89 MB
27.89 MB
27.89 MB