Casio DT-X7 Series Software Manual page 286

5.4 Welcome Wizard
The Welcome Wizard sets up the following. However, each of the settings can be skipped if not
necessary.
- Configuring the terminal
- Owner information
- Date and time
Notes:
• Setting date and time can be avoided by setting a password even if a full reset takes place on
the terminal.
• Setting date and time must be performed when the RTC is cleared by a full reset on the
terminal.
Customizing Startup Screen
An optional bitmap can be displayed as the Welcome Wizard startup screen. Save an optional
bitmap file as FirstDisp.bmp in the "\FlashDisk" folder. The screen size of the file must be set
in 240 x 320 dots.
286