Casio DT-X7 Series Software Manual page 93

Configuration File
The various setting values made at Imager Setting of the Control Panel can be stored in an
INI-type file and resumed. The configuration file storage location and its name are
"\FlashDisk\System Settings\ IMGSet.ini".
By calling IMGLoadConfigFile function, the content in the configuration file is deployed into
the Imager, or the default values are used to initiate the Imager if there is no such the
configuration file.
The functions of the Imager Library relevant to the "Configuration File" are as follows.
IMGLoadConfigFile : Sets up the Imager using configuration file.
IMGSaveConfigFile : Retrieves the Imager settings and saves into configuration file.
The setting in the configuration file is divided into two parts, the setting for scanning bar codes
and the other for common operations. See the next three pages.
93