Casio DT-X7 Series Software Manual page 98

[Auto Power OFF] Section
Auto Power OFF
[Indicator] Section
LED
Buzzer
Vibrator
Imager's APO timer
Specify turning on the LED when
scanning is complete.
Specify turning on the buzzer when
scanning is complete.
Specify turning on the vibrator when
scanning is complete.
98
Specify in the range 60
of 0 to 1800 (in
second).
"0" disables APO.
"1 to 1800" turns off
the power to the
Imager after the time
period has elapsed.
0; disable 2
1; enable in green
2; enable "success" in
green and "failure" in
red
0; disable 1
1; enable
0; disable 1
1; enable