Casio DT-X7 Series Software Manual page 39

2.1.10 LED
Basic Specifications
There are two LEDs integrated in the terminal, one on the right side for the user notification and
the other for charging the battery complete notification.
Table 2.16
LED
Right side LED
(Indicator #2)
Left side LED
(Indicator #1)
Notes:
• The user notification LED on the right side can be used to indicate various notifications by the
OS and other notifications defined by the user.
• All colors available in the LED on the right side (Indicator #2) are indicated with the System
Library.
• The charging battery complete LED on the left side (Indicator #1) cannot be controlled or
manipulated for its ON/OFF state and color with software.
User Notification (Alarm)
This indication mode is used for alarm notification, etc. The LED can be lit for a specific time
with CeSetUserNotification()API function.
Table 2.17
Operating Mode
Blink interval
Continuous ON time
Note:
Indication for scanning a bar code has the priority over other indications.
Scanning
This is used for notification of a scanning result which is controlled with the System Library.
Table 2.18
Operating Mode
Scanning complete
Scanning in error
Color
Red User notification (alarm), scanning a bar code
Green Scanning a bar code
Blue Connection established via Bluetooth
Orange Connection established via WLAN
Cyan User defined
Magenta User defined
Red While charging battery pack.
Green Charging battery pack is complete.
ON in red for 1 second, OFF for 2 seconds
ON for 30 minutes (OFF when VDET is detected.)
Specification
ON in green for a specified period of time, then OFF. L_SCANOK
ON in red for a specified period of time, then OFF.
39
Description
Specification
Attribute
L_SCANERR