Advertisement
1 - GENERAL
Note to the Owner
This manual contains information concerning the adjustment and maintenance of your new equipment. You have
purchased a dependable machine, but only by proper care and operation can you expect to receive the performance
and long service built into this equipment. Please have all operators read this manual carefully and keep it available
for ready reference.
The NEW HOLLAND dealer will provide instructions on the general operation of new equipment. The dealer's staff,
assigned to maintenance, is available for any questions related to the operation of the machine.
Your NEW HOLLAND dealer carries a complete line of genuine NEW HOLLAND service parts. These parts are
manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts.
Be prepared to give your dealer the model and product identification number of your new equipment when ordering
parts. Locate these numbers now and record them below. Refer to the 'General Information' section of this manual
for the location of the model code and product identification numbers of your machine.
Model :
Product Identification Number (PIN):
Warning symbol. It is used with and without signal words to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible death or injury.
WARNING
Illustrations in this manual may show protective shielding open or removed to better illustrate a par-
ticular feature or adjustment.
Replace all shields before operating the machine.
Failure to comply could result in death or serious injury.
The machine has been designed and built according to the highest standards of quality and it complies with all current
safety regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to
observe elementary safety rules and precautions.
Read this manual carefully, paying particular attention to the instructions concerning safety, operation and mainte-
nance so as to avoid the risk of injury while operating or servicing the machine.
Do not use this machine for any application or purpose other than those described in this manual. If the machine is to
be used for work involving the use of special attachments, accessories or equipment, consult your NEW HOLLAND
Dealer in order to make sure that any adaptations or modifications made are in keeping with the machine's technical
specifications and with prevailing safety requirements.
Any modification or adaptation which is not approved by the manufacturer may invalidate the machine's initial confor-
mity with safety requirements.
The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult
your authorized NEW HOLLAND dealer.
Always keep this manual in the operator's compartment (in the seat back, behind the operator's seat). Make sure it is
always complete and in good condition. To receive extra copies of the manual or copies in languages other than that
of your country of residence, please contact your NEW HOLLAND dealer.
The manufacturer is committed to the constant improvement of its products. We reserve the right to make improve-
ments or changes when it becomes practical and possible to do so, without incurring any obligation to make changes
or additions to the equipment sold previously.
1 - GENERAL INFORMATION
INFORMATION###_1_###
PLEASE RECORD THE FOLLOWING INFORMATION
1-1
W0012A
Advertisement
