Transmission Fluid Level - New Holland WORKMASTER 35 Operator's Manual

Table of Contents

Advertisement

Transmission fluid level

NOTE: Check the transmission, rear axle, and hydraulic
system oil level after every 50 hours of operation.
1. With the engine off and the tractor standing level, check
the oil level using the dipstick (1).
2. The oil is at the correct level when it reads between
the two marks (A) on the dipstick. If the level is low,
add NEW HOLLAND AMBRA MULTI G 134™ HY-
DRAULIC TRANSMISSION OIL hydraulic oil through
the dipstick hole. Do not fill above the dipstick full mark.
3. Reinstall the dipstick.
7 - MAINTENANCE
7-16
1
NHIL12CT00684AA
2
93100904

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workmaster 40

Table of Contents