CHAPTER 9 Troubleshooting
➢ To deactivate DSP recording using SSH protocol, type the following at the shell
prompt:
setprop ac.dr_voice_enable false
DSP recording can be deactivated on the fly without requiring the network administrator
to reset the phone.
Getting the Phone IP Address
Network administrators can get a phone's IP address using SSH protocol.
➢ To get the phone's IP address using SSH protocol, type the following at the shell
prompt:
su
ifconfig
Getting Information about Phones
Network administrators can get information about phones using SSH protocol.
➢ To get firmware information from a phone using SSH protocol, type the following at
the shell prompt:
getprop ro.build.id
➢ To get Bootloader information using SSH protocol, type the following at the shell
prompt:
getprop ro.bootloader
➢ To get DSP information using SSH protocol, type the following at the shell prompt:
getprop ro.ac.dsp_version
C470HD | Users & Administrator's Manual
- 79 -