CHAPTER 3 Starting up
Setting
Configuring Wi-Fi
Network administrators can configure Wi-Fi parameters for the phone. The parameters are
concealed from the user's view. Use the following table as reference.
Parameter
network/wifi_enabled
Log settings
Remote Logging (see under Remote Logging on page 74 for more
information)
Diagnostic Data (see under Diagnostic Data on page 75 for more
information)
Reset configuration
Restart Teams app
Company portal login
Debug Recording (for Media/DSP debugging) (see under
Logging on page 74 for more information)
Switch to Teams Compatible
Factory data reset (the equivalent of restore to defaults; including
logout and device reboot)
ADB (Android Debug Bridge command-line tool used to debug the
Teams app); the setting is disabled by default; leave it unchanged at the
default unless there's a real necessity to use it.
Screen Capture. By default, this setting is enabled. If it's disabled, the
phone won't allow its screens to be captured.
Table 3-2: Wi-Fi Parameters
Enables/disables the Wi-Fi feature.
- 22 -
C470HD | Users & Administrator's Manual
Description
Description
Remote
Values
0
(disable,