Restoring The Phone To Default Settings; Performing A Hard Restore - AudioCodes 400HD Series User's And Administrator's Manual

CHAPTER 3 Starting up
Parameter
network/wifi/[0-
15]/identity
network/wifi/[0-
15]/anonymous_
identity
network/wifi/[0-
15]/phase2_
authentication
network/wifi/[0-
15]/pin_code
network/wifi/[0-
15]/wps_method

Restoring the Phone to Default Settings

Users can restore the device to factory default settings at any time. The feature can be used if a
user forgets their Admin password, for example. Two kinds of restore are available:
■
Performing a Hard Restore below
■
Performing a Soft Restore on the next page

Performing a Hard Restore

You can restore the phone's settings to their defaults when the phone is up and running (see
below)
➢ To perform a hard restore while the phone is up and running:
1.
Long-press the HOLD key on the phone (more than 15 seconds); the screen shown below
is displayed and the device performs a restore to default factory settings.
Description
Saves the identity for some authentication methods
that need it, e.g., WPAPERSONAL, WPA2PERSONAL
Saves the anonymous identity for some
authentication methods that need it, e.g.,
WPAENTERPRISE, WPA2ENTERPRISE, etc.
Phase 2 authentication for WPAENTERPRISE,
WPA2ENTERPRISE.
The phone supports PAP, MSCHAP, MSCHAPV2,
CHAP, MD5, GTC
Defines the PIN code for the WPS PIN code
authentication method.
Defines the WPS method. The phone supports PIN
and push button.
- 24 -
C470HD | Users & Administrator's Manual
Values
-
-
-
String of
up to 64
characters
None
ALL
(default)
PIN
AUTH
PBC