Huawei UPS5000-S-600 kVA User Manual page 83

Singapore, threephase, three-wire
Hide thumbs Also See for UPS5000-S-600 kVA:
Table of Contents

Advertisement

UPS5000-S-600 kVA
User Manual (Singapore, Three-phase, Three-wire)
Figure 4-10 Settings screen 2
Comm Settings
Figure 4-11 Comm. Settings (lithium battery)
Figure 4-12 IP Settings
IP address allocation
Issue 01 (2021-04-14)
If the MDU is directly connected to a computer, the IP address can only be
allocated manually. The IP addresses of the MDU and computer must be in
the same network segment, and must be different.
If the MDU is connected to a computer through a LAN switch or router with
the DHCP function, the IP address can be allocated manually or automatically.
Manual allocation is used by default.
Manual: Check that their IP addresses are two different values on the
same network segment. Set the UPS IP address to be in the same subnet
as the PC IP address. Perform the bitwise AND operation for the UPS IP
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
75

Advertisement

Table of Contents
loading

Table of Contents