Rccmd - Huawei UPS5000-S-600 kVA User Manual

UPS5000-S-600 kVA
User Manual (Singapore, Three-phase, Three-wire)
●
●
●
●
●
●
●
●
●
●
●
●
●

4.2.4.3 RCCMD

RCCMD
RCCMD function is set to Disable by default, as shown in
set it to Enable upon first login. After you submit the setting, the page refreshes.
Issue 01 (2021-04-14)
The default SNMP version is SNMPv3, and the preset MD5/SHA password is
Changeme1, and the preset DES/AES password is Changeme2. Change the
password after your first login, preventing unauthorized access.
NO TE
● The standard protocols SNMP V1 and SNMP V2 have security risks. You are advised
to use the secure protocol SNMP V3.
● The standard encryption algorithms MD5 and DES have security risks. You are
advised to use the secure encryption algorithms SHA and AES.
To obtain the MIB file, choose Config. > Site Config. > SNMP > Download
HUAWEI_UPS_MIB.
SNMP Trap indicates the IP address of the server configured with network
management system (NMS) software. If SNMP Trap is incorrectly set or not
set, system information will be lost or not reported in time.
The certificate is used for Secure Sockets Layer (SSL) encryption protection for
WebUI login. You need to apply to a third-party institution for the certificate.
Configuration Management is used to upload and export configuration
parameters in the monitoring system.
Multi-brand Management is used to import the brand information of a
partner to the corresponding WebUI.
Specify Email server IP address, Sender's email, and User account
authentication required when sending a mail and click Test to check
whether the test email can be received. Configure Alarm Notification Server
is used to configure a server for receiving alarm emails from the monitoring
system.
Set Email and Alarm Severity and simulate an alarm. Check that the alarm
email can be received. Configure Alarm Notification Email Address is used
to configure the email address for receiving alarm emails from the monitoring
system.
ModbusTCP Certificate Management: ModbusTCP supports the Transport
Layer Security (TLS) secure protocol for encrypted transmission and
implements access authentication through the bidirectional certificate.
Customers can replace the UPS certificate with the certificate trusted by them.
ModbusTCP CA Certificate Management: Import a CA certificate to verify
the validity of the ModbusTCP access certificate.
ModbusTCP Authentication: Verify the identity legitimacy of both parties to
ensure data security for both parties in ModbusTCP communication.
After eUPS certificate management is configured, a certificate can be
imported on the WebUI to replace the preset eUPS certificate.
When using the mobile app for site setup or inspection, set WiFi SSID after
connecting a WiFi module over a USB port to identify the WiFi device to
which the mobile phone is connected.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Figure 4-46. If required,
109