Particle Measuring Systems LASAIR II 310 Operator's Manual page 80

Press the Press the Enter Enter softkey to enable the edit mode. The Data Filter mode 1/0 (on/ softkey to enable the edit mode. The Data Filter mode 1/0 (on/
2 2
off) button will be highlighted. off) button will be highlighted.
3 3 Press the Press the Enter Enter softkey again to enable the Data Filter mode. softkey again to enable the Data Filter mode.
The following instructions describe how to enable and set the The following instructions describe how to enable and set the Start
NOTE: NOTE:
parameters. The same instructions apply to the parameters. The same instructions apply to the End
4 4 Use the T T ab F Use the ab Forward orward and
Start 1/0 button located on the upper left part of the screen. Start 1/0 button located on the upper left part of the screen.
5 5 Press the Enter Press the Enter softkey to en softkey to enable the Start filter.
6 6 After enabling the After enabling the Start Start filter,
field. field.
NOTE: NOTE: If you know that you have data that ca If you know that you have data that can be filtered, but you are unable
to advance to the date filter field it probably means that someone has chan to advance to the d ate filter field it probably means that someone has changed
the instrument date after some data had been stored in memory. the instrument date after some data had been stored in memory.
7 7 Use the right and left arrow keys to move the cursor to the right of the part Use the right and left arrow keys to move the cursor to the right of the part
of the date (day, month, year) you want to change and then use the u of the date (day, month, year) you want to change
or or down down arrows arrows to to set
8 8 When the date is correct, press the When the date is correct, press the Enter
9 9 Use the right and left arrow keys to move the cursor to the Use the right and left arrow keys to move the cursor to the
time you want to change. time you want to change.
10 10 Use the up and down arrows to set the time field to the time you want and then Use the up and down arrows to set the time field to
press the Enter key to accept your time and move the focus back to the 1/0 press the Enter key to accept your time and move the focus back to the 1/0
button. button.
Press the T T ab F Press the ab Forward orward icon softkey to move to the
11 11
the same procedure as above to set the parameters. the same procedure as above
To disable Start or End filtering: To disable Start or End filtering:
1 1 Navigate to the Navigate to the Data Filter Screen Data Filter Screen. .
Activate the Edit mode by pressing the Activate the Edit mode by pressing the Enter
2 2
Navigate t Navigate to the o the 1/0 1/0 button of button of the f
3 3
Press the Enter Press the Enter button to toggle the 1/0 button to button to toggle the 1/0 button to OFF
4 4
To filter data by location: To filter data by location:
Navigate to the Navigate to the Data Filter-Location Scr Data Filter-Location Screen
1 1
NOTE: NOTE: Several clicks of the Several clicks of the T T ab F
Data Filter/Time Screen will take you to the Data Filter/Location Screen. Data Filter/Time Screen will take you to the Data Filter/Location Screen.
LASAIR II Operator's Manual LASAIR II Operator's Manual
and Tab Back Tab Back icon softkeys to navigate to the filter mode icon softkeys to navigate to the filter mode
able the Start filter.
filter, press press the the down down arrow arrow
set the the date date field field to to the the date
Enter button to move to the time field. button to move to the time field.
icon softkey to move to the End
to set the parameters.
Enter button. button.
the filter ilter function you function you want
een. .
ab Forward orward or or Tab Back
Viewing Sample Data Viewing Sample Data
End parameters. parameters.
key key to to move move to to the the date
n be filtered, but you are unable
and then use the up p
date you you want. want.
left left
of the part of the of the part of the
the time you want and then
End filter 1/0 button and use filter 1/0 button and use
want to dis to disable, able, Start Start or
OFF . .
Tab Back icon softkeys in the icon softkeys in the
Page Page
6-9 6-9
Start
date
ged
or End End . .