Particle Measuring Systems LASAIR II 310 Operator's Manual page 190

LCD Screen Output LCD Screen Output
Alarms Alarms
Enabling the Pharmaceutical T Enabling the
Appendix H Appendix H
Pharmaceutical (Two-channel) Output Pharmaceutical (T
T T o support some pharmaceutical applications, the LASAIR o support some pharmaceutical applications, the LASAIR II can be configured
to display and print 0.5 to display and print 0.5
While the Pharmaceutical Two-channel mode is enabled, the While the Pharmaceutical Two-channel mode is enabled, the Data T
will display only 0.5 will display only 0.5
"0.5 and 5.0 TCP/IP" is enabled, the data transmitted will only include these "0.5 and 5.0 TCP/IP" is enabled, the data transmitted will only include these
two channels. Otherwise, all six channels of data will be transmitted. two channels. Otherwise, all six channels of data
Alarms for all six channels are still available. It is advisable, howev Alarms for all six channels a
that only cumulative alarms are used, and that the alarms be only for the 0.5 that only cumulative alarms are used, and that the alarms be only for the 0.5
µ µ
and 5.0 and 5.0 m channels. Differential alarms will not be valid for the derived two- m channels. Differential alarms will not be valid for the derived two-
channel data. channel data.
Pharmaceutical Two-Channel Output
This option is enabled from the This option is enabled from the Comm Setup Screen
To enable the pharmaceutical two-channel output mode: To enable the pharmaceutical two-channel output mode:
1 1 From the Main Display Screen From the Main Display Screen, click the
Main Setup Screen will open. Main Setup Screen will open.
2 2 Click the Comm Setup Click the Comm Setup icon
L L A A S S A A I I R R I I I I O O p p e e r r a a t t o o r r ' ' s s M M a a n n u u a a l l
wo-channel) Output Mode
µ µ µ µ
m and 5.0 m and 5.0 m m channels on channels only ly. .
µ µ µ µ
m and 5.0 m and 5.0 m channel cumulative count data. Further, if m channel cumulative count data.
re still available. It is advisable, however, to ensure
wo-Channel Output Mode
Comm Setup Screen. .
, click the Main Setup Main Setup icon softkey. The
icon softkey softkey. . The The Comm Setup Screen
Mode
II can be configured
Data Table Scr able Screen
Further, if
will be transmitted.
er, to ensure
Mode
icon softkey. The
Comm Setup Screen will open. will open.
P P a a g g e e H H - - 1 1
een
µ µ
m m