Particle Measuring Systems LASAIR II 310 Operator's Manual page 200

4-20 mA Output 4-20 mA Output
LASAIR II (software version 1.4.0 or newer) supports 4-20 mA output. This LASAIR II (software version 1.4.0 or newer) supports 4-20 mA output. This
feature is enabled and configured from the 4-20 mA Out Setup Screen feature is enabled and configured from the
NOTE: NOTE: Use of this feature requires an optional 4-20 mA board to be installed Use of this feature requires an optional 4-20 mA bo
in the LASAIR II. in the LASAIR II.
If a board is installed, but the 4-20 mA feature is disabled, all outputs will be set If a board is installed, but the 4-20 mA feature is disabled, all outputs will be set
to 4 mA. to 4 mA.
Figure J-1: 4-20 mA Output Setup Screen Figure J-1: 4-20 mA Output Setup Screen
4-20 mA Output 4-20 mA Output
4-20 mA Out Setup Screen. .
ard to be installed
Page Page
J-3 J-3