Particle Measuring Systems LASAIR II 310 Operator's Manual page 215

Appendix M: TouchRam Appendix M: TouchRam
T T ouchRAM Buttons with ouchRAM Buttons with TCP/IP Address
Rules for Reading TouchRAM Buttons Rules for Reading TouchRAM Buttons
Page M-6 Page M-6
TCP/IP Address
In facilities with Pharmaceutical Net software, data sampled at various locations In facilities with Pharmaceutical Net software, data sampled at various locations
can be conveniently downloaded to Pharmaceutical Net, and then analyzed and can be conveniently downloaded to Pharmaceutical Net, and then analyzed and
archived. In large facilities with several Pharmaceutical Net installations, it may archived. In large facilities with several Pharmaceutical Net installations, it may
be beneficial to be able to automatically change the TCP/IP address of the be beneficial to be able to automatically change the TCP/IP address of the
LASAIR II when it is moved from one Pharmaceu LASAIR II when it is moved from one Pharmaceutical Net area to another.
T T ouchRAM buttons can have ouchRAM buttons can have a TCP/IP address programmed in them, which
facilitates this facilitates this capability capability. .
Setting the TCP/IP Address Setting the TCP/IP Address in a TouchRAM Button
Figure M-2, below Figure M-2, below, shows the LASAIR I , shows the LASAIR II Comm Setup Screen. The "Serial"
page shown i page shown in the l n the left side eft side sets the
T T ouchRAM buttons, ouchRAM buttons, "T
be written with or without the TCP/IP address. In order to wr be written with or without the TCP/IP address. In order to write the TCP/IP
address, the "TouchRAM W address, the "TouchRAM Write TCP/IP" button must be selected
screen. If this setting is disabled, a 0.0 screen. If this setting is disabled, a 0.0.0.0 is written for the TCP/IP address. Th
0.0.0.0 is ignored when the button is read. 0.0.0.0 is ignored when the button is read.
Figure M-2: Comm Setup Screens for Configuring TouchRAM Figure M-2: Comm Setup Screens for Configuring TouchRAM
T T o read a o read a button, the serial setup button, the serial setup must be either "TouchRAM Read" or
"TouchRAM Read/Write". The Data "T ouchRAM Read/Write". The Data page setting
IP" has no effect when reading buttons. In other words, even if this setting is IP" has no effect when reading buttons. In
disabled, the TCP/IP address will be read and disabled, the TCP/IP address will be read and processed from a button.
The following processing occurs when a button is read: The following processing occurs when a button is read:
• • If the TCP/IP address is read as 0.0.0.0, n
If the TCP/IP address is read as 0.0.0.0, no additional processing occurs.
• • If the TCP/IP address is the same as the on
If the TCP/IP address is the same as the one on the LASAIR II, then no
additional processing occurs. additional processing occurs.
LASAIR II II Operator's LASAIR
a TCP/IP address programmed in them, which
in a TouchRAM Button
I Comm Setup Screen. The "Serial"
sets the function of function of the serial
"TouchRAM Read/Write" must be ouchRAM Read/Write" must be selected. Buttons can
rite TCP/IP" button must be selected on the "Data"
.0.0 is written for the TCP/IP address. The e
must be either "TouchRAM Read" or
page setting of "TouchRAM Write TCP/
other words, even if this setting is
o additional processing occurs.
Operator's Manual Manual
tical Net area to another.
the serial port. T port. To read and o read and write
selected. Buttons can
ite the TCP/IP
on the "Data"
of "TouchRAM Write TCP/
processed from a button.
e on the LASAIR II, then no
write