Particle Measuring Systems LASAIR II 310 Operator's Manual page 172

Appendix E Appendix E
Comma Separated Value (CSV) Format Comma Separated Value (CSV) Format
With this file format, you can properly label the value headings. The following With this file format, you can properly label the value
items are numbered in the order that they will appear in the CSV file. The CSV V items are numbered in the order that they will appear in the CSV file. The CS
file, however, will not include the order numbers. file, however, will not include the order numbers.
Ref. Ref. Data Description Data Description
No No
S S a a m m p p l l e e D D a a t t e e : Formatted YYYY/MM/DD
1 1
3 3 Sample Time : : Formatted HH:MM:SS {End of Sample} Sample Time
4 4 Sensor Name Sensor Name : : User entered name. Up to 16 characters. Name is delimited
by quotation (") marks. by quotation (") marks.
5 5 Sensor Type Sensor Type : : Hard coded value. Example: "LasairII-310"
6 6 Sensor S/N Sensor S/N : : This value programmed during initial calibration.
Statistics : This field is a "" if statistics are not used. If they are Statistics : This field is a "" if statistics are not used. If they are used, then
7 7
the field contains both the name of the room in which the statistics were the field contains both the name of the room in which the statistics were
taken and, the t taken and, the type. The type can be FS-209E,
EC-GMP and ISO, BS-5295, or EC-GMP and ISO, BS-5295, or A A VERAGE. The room name
before the statistics type with a "--" separating the t before the statistics type with a "--" separating the two. An example is
"BallroomA--FS209E". Maximum room name length is 16 charac "BallroomA--FS209E". Maximum room name length is 16 characters,
thus the maximum string length is less than 32 characters. thus the maximum string length is less than 32 characters.
8 8 Loc Chg : When outputting a CSV block, this field will be set to a "*" if Loc Chg : When outputting a CSV block, this field will be set to a "*" if
the location has changed from the last record printed. Otherwise, this field the location has changed from the last record printed. Otherwise, this field
will be a ".". will be a ".".
Location : User location name. Up to 16 characters. The name will be Location : User location name. Up to 16 characters. The name will be
9 9
delimited by " marks. If the first character of the location is a "?", then the delimited by " marks. If the first character of the location is a "?", then the
location name has been changed since the data sample was saved. The location name has been changed since the data sample was saved. The
sample only has an index to the name. sample only has an index to the name.
10 10 Manifold : The manifold position. The value will be 0 (zer)0 if no Manifold : The manifold position. The value will be 0 (zer)0 if no
manifold exists. With a manifold, lowest number will be 1. 1. manifold exists. With a manifold, lowest number will be
11 11 Laser OK : 1 = OK, 0 = bad. (Language independent) Laser OK : 1 = OK, 0 = bad. (Language independent)
L L A A S S A A I I R R I I I I O O p p e e r r a a t t o o r r ' ' s s M M a a n n u u a a l l
CSV Value Format and Description CSV Value Format and Description
: Formatted YYYY/MM/DD
Formatted HH:MM:SS {End of Sample}
User entered name. Up to 16 characters. Name is delimited
Hard coded value. Example: "LasairII-310"
This value programmed during initial calibration.
ype. The type can be FS-209E, ISO-14644-1, EC-GMP
VERAGE. The room name is added
headings. The following
used, then
ISO-14644-1, EC-GMP, ,
is added
wo. An example is
ters,
P P a a g g e e E E - - 1 1