Statistics Summary Screen - Particle Measuring Systems LASAIR II 310 Operator's Manual

Chapter 8: Statistics Mode Chapter 8: Statistics Mode
Observing Statistical Results Observing Statistical Results
Page 8-16 Page 8-16
Move the LASAIR II to the next sampling location and continue sampling until Move the LASAIR II to the next sampling location and continue sampling until
8 8
all locations are sampled or terminate sampling if you must. all locations are sampled or terminate sampling if you must.
Sample results are displayed in the Statistics Summary Sample results are displayed in the
Table after each sample is completed. Table after each sample is completed.
Statistics Summary Stat istics Summary Screen
The Statistics Summary The Statistics Summary screen displays settings, progress, and the cumulative
result of completed samples. result of completed samples.
Figure 8-4: Statistics Summary Screen Figure 8-4: Statistics Summary Screen
The following data is displayed on the The following data is displayed on the Statistics Summary screen.
T T able 8-6: able 8-6: Statistics Summary Screen Data
D D a a t t a a
ISO 14644/ISO 9 ISO 14644/ISO 9
Name: Name:
Sample locations Sample locations
completed, Total completed, Total
number of locations, number of locations,
and Minimum and Minimum
number of locations number of locations
LASAIR II II Operator's LASAIR
Statistics Summary screen and the
Screen
screen displays settings, progress, and the cumulative

Statistics Summary screen.

Statistics Summary Screen Data
D D e e f f i i n n i i t t i i o o n n
the name of the the name of the user-selected standard and class user-selected standard and class
the user-assigned name of the room that is the user-assigned name of the room that is being sampled
Example: 5 locations have been completed. The total number Example: 5 locations have been completed. The total number
of locations planned to be sampled was five. of locations planned to be sampled was five. The minimum
number of locations requested is 5. If the BS-5295 standard is number of locations requested is 5. If the BS-5295 standard is
not not being used, the user may being used, the user may set the total number of locations
to a number greater than the minimum. to a number greater than the minimum.
Operator's Manual Manual
screen and the Statistics Statistics
being sampled
The minimum
set the total number of locations