Particle Measuring Systems LASAIR II 310 Operator's Manual page 171

Appendix D: TCP/IP Protocol: A Brief Overview Appendix D: TCP/IP Protocol: A Brief Overview
Page D-2 Page D-2
T T o use the o use the Windows for Workgroups TCP/IP Windows for Workgroups TCP/IP PING:
1 1 With Windows running, open a DOS window by double-clicking on the With Windows running, open a DOS window by double-clicking on the
MS-DOS Prompt icon. MS-DOS Prompt icon.
2 2 At the DOS prompt, type PING <IP ADDRESS> (using the address of the At the DOS prompt, type PING <IP ADDRESS> (using the address of the
device for which you wish to test your computer's LAN communications). device for which you wish to test your computer's LAN communications).
The PING The PING utility will report whether or not the other de utility will report whether or not the other device responded, and
what the response time was. what the response time was.
For more information on TCP/IP and networking fundamentals, please see the For more information on TCP/IP and networking fundamentals, please see the
PMS Serial Communications & Networking Manual. PMS Serial Communications & Networking Manual.
LASAIR II II Operator's LASAIR
PING:
Operator's Manual Manual
vice responded, and