Particle Measuring Systems LASAIR II 310 Operator's Manual page 178

CDELAY sec CDELAY sec
Response: " Response: "
RDELAY sec RDELAY sec
This is a backward compatible command. Delay is specified as start of first This is a backward compatible command. De
sample to start of next sample. Sample volume or sample time must be set sample to start of next sample. Sample volume
first for this command to first for this command to work properly. Ti
volume is set rather than sample time. volume is set rather than sample time.
Set continuous sampling on/off (1/0). If turned off, then number of Set continuous sampling on/off (1/0). If turned off, then number of samples
is set to one. Use CNOS to set is set to one. Use CNOS to set number of samples.
CDT yy mm dd hh mm ss CDT yy mm dd hh mm ss
Set date and time. Either two Set date and time. Either two digit or four digit year is ok.
Response: " Response: " " "
RDT RDT
CES CES
End Sampling. End Sampling.
Response: " Response: " " "
RES 1 RES 1
CFQ CFQ
Response: " Response: " " "
RPQ 1 RPQ 1 or or
Flush data queue--erase all data. Note: LASAIR II can un-erase data from Flush data queue--erase all data. Note: LASAIR
this command if no samples are taken, and locations are not erased. this command if no samples are taken, and locations are not erased.
CID name CID name
Response: " Response: "
RID name RID name
Set sample ID (location) to given string. This command translates all Set sample ID (location) to given string. This command translates all
characters to upper case. The characters to upper case. The only legal characters in this command are
Z, a-z, and 0-9 Z, a-z, and 0-9
location names are not legal here. location names are not legal here.
CISDELAY CISDELAY sec sec
Response: " Response: "
RISDELAY sec RISDELAY sec
Set inter-sample delay in seconds. Delay is from end-to-start. Set inter-sample delay in seconds. Delay is from end-to-start.
CKB n CKB n
Response: " Response: " " "
RKB m RKB m
Lock/unlock the keyboard (1/0). If the keyboard is not locked, the Lock/unlock the keyboard (1/0). If the keyboard is not locked, the
instrument can be stopped or controlled from front panel. instrument can be stopped or controlled from front panel.
CNOS nnn CNOS nnn
Response: " Response: "
RNOS mmm RNOS mmm
Set total number of samples. Setting to -1 c Set total number of samples. Setting to -1 causes continuous sampling.
If the operation is successful, If the operation is successful,
CPDELAY sec CPDELAY sec
Response: " Response: "
RPDELAY sec RPDELAY sec
Set purge delay in seconds. Set purge delay in seconds.
Multi-Drop Command Coding Overview Multi-Drop Command Coding Overview
" "
work properly. Times are approximate mes are approximate if sample
number of samples.
digit or four digit year is ok.
(success) or (success) or " " " (failure) " (failure)
RES 0 RES 0
" " " "
RPQ 0 RPQ 0
" "
only legal characters in this command are
. Other characters which are legal for LASAIR II II . Other characters which are legal for LASAIR
" "
" "
auses continuous sampling.
= = . .
nnn nnn mmm mmm
" "
lay is specified as start of first
or sample time must be set
if sample
samples
II can un-erase data from
Page Page
F-3 F-3
A- A-