Particle Measuring Systems LASAIR II 310 Operator's Manual page 186

63 63 Search Search Alarm Alarm Print Print On/Off
C Command Table Format C Command Table Format
These commands are from the C command above. All of these commands are These commands are from the C command above. All of these commands are
redundant, and are provided for users of existing LASAIRs who want to redundant, and are provided for u
simplify their upgrade path. Some of these commands split internal variables simplify their upgrade path. Some of these commands split internal variables
into several pieces. For instance " into several pieces. For instance "
time. Because of the variable split, unexpected results can be obtained if the user time. Because of the variable split, unexpected results can be obtained if the user
is not careful with software coding. For instance, setting the is not careful with software coding. For instance, setting the date and time in
multiple parts has the possibility of time-rollover in-between settings. In other multiple parts has the possibility of time-rollover in-between settings. In other
words, if the LASAIR II seconds rolls over from 59 to 0, then at a words, if the LASAIR II seconds rolls over from 59
minutes will also change, and minutes will also change, and if this occurs right after setting the minutes, then
the expected time will be wrong. the expected time will be wrong.
C nn sssssssssss C nn sssssssssss
where: where:
C nn = command # (0-38) C nn = command # (0-38)
sssssssssss = any sssssssssss = any alphanumeric entry appropriate to the parameter being
defined. defined.
LASAIR II Operator's Manual LASAIR II Operator's Manual
On/Off
sers of existing LASAIRs who want to
C 0 C 0 " through " " through " C 6 C 6
if this occurs right after setting the minutes, then
Command Format Command Format
alphanumeric entry appropriate to the parameter being
C Commands C Commands
" are used to set date and " are used to set date and
date and time in
to 0, then at a minimum the minimum the
Page Page
G-5 G-5