Particle Measuring Systems LASAIR II 310 Operator's Manual page 161

Appendix B: Connecting to a Computer or Network Appendix B: Connecting to a Computer or Network
Page B-4 Page B-4
Gateway Gateway The gateway address is used when communicating across a different The gateway address is used when communicating
network. This field sets the gateway address in a form of network. This field sets the gateway address in a
Each 3-digit series is a value of 0–255, separated by a period(.). An ex Each 3-digit series is a value of 0–255, separated by a period(.). An example of
a valid gateway address is: 10.255.0.60. If this field is blank, the instrument can a valid gateway address is: 10.255.0.60. If this field is blank, the
only communicate to addresses in the same network. only communicate to addresses in the same network.
Multicast Multicast The multicast address must be assigned if you are using The multicast address must be assigned if you are using
Pharmaceutical Net or Facility Net. This field sets the multicast address in Pharmaceutical Net or Facility Net. This field sets the multicast address in a a
form of form of
aaa.bbb.ccc.ddd aaa.bbb.ccc.ddd
by a period (.). An example of a valid multicast address is: 224.100.100.1. by a period (.). An example of a valid multicast address is: 224.100.100.1.
Enable Web Server Enable Web Server
check-mark in the box. It allows access to the LASAIR II from a web browser check-mark in the box. It allows access to the LASAIR II from a web browser
such as Internet Explorer or Netscape Navigator. Disabling this function on the such as Internet Explorer or
unit removes the ability for remote control and viewing of sampling. unit removes the ability for remote control and viewing
Enable TCP/IP Enable TCP/IP The default setting for this field is Enable; note the check The default setting for this field is Enable; note the check
mark in the box. It allows a user to connect to Facility/Pharmaceutical Net. mark in the box. It allows a u
Disabling this function on the unit removes the ability to use these applications. Disabling this function on the unit removes the ability to use these applications.
TCP/IP Remote Mode TCP/IP Remote Mode
this instrument as a "Remote Instrument". When connected to Facility Net, this instrument as a "Remote Instrument". When connected to
stored data will be downloaded, and Facility Net will then disconnect. stored data will be downloaded, an
must also be checked. must also be checked.
TCP/IP TCP/IP
Setting up the PC for Direct Web Browser Interface with Setting up the PC for Direct Web Browser Interface with
LASAIR II LASAIR II
You must assign an IP address and netmask to the computer making a TCP/IP You must assign an IP address and netmask to the computer making a TCP/IP
connection. After entering or changing your PC's network address, you must connection. After entering or changing your PC's network address, you must
reboot your PC or the add reboot your PC or the address will not be recognized.
Setting your computer's TCP/IP addresses (Windows 95 and Windows 98) Setting your computer's TCP/IP addresses (Windows 95 and Windows 98)
for directly interfacing LASAIR II with a web browser: for directly interfacing LASAIR II with a web browser:
Click Start > Settings > Control Panel. Click Start > Settings > Control Panel.
1 1
2 2 Double-click Double-click the the Network Network icon.
LASAIR II II Operator's LASAIR
. Each 3-digit series is a value of 0–255, separated . Each 3-digit series is a value of 0–255, separated
The default setting for this field is Enable; note the The default setting for this field is Enable; note the
Netscape Navigator. Disabling this function on the
ser to connect to Facility/Pharmaceutical Net.
Enable this check box to cause Facility Net to treat Enable this check box to cause Facility Net to treat
d Facility Net will then disconnect.
ress will not be recognized.
icon. The Network The Network dialog
Operator's Manual Manual
across a different
form of .ddd. .ddd.
aaa.bbb.ccc aaa.bbb.ccc
ample of
instrument can
of sampling.
Facility Net,
Enable Enable
dialog box box will will open: open: