Particle Measuring Systems LASAIR II 310 Operator's Manual page 63

Chapter 5: Setup Chapter 5: Setup
Page 5-16 Page 5-16
Analog Alarm Input Area Analog Alarm Input Area
Figure 5-9: Alarm Setup Screen, Analog Alarms Page Figure 5-9: Alarm Setup Screen, Analog Alarms Page
Press Enter to activate Edit Mode. Press Enter to activate Edit Mode.
2 2
Tab to the first Tab to the first Min Min value field in the list. Use value field in the list. Use the directional arrow buttons on
3 3
the control panel to move around the list of variables. the control panel to move around
Press Press to initiate the ability to change an alarm limit in a Min or Max field. to initiate the ability to change an alarm limit in a
4 4
Enter Enter
Use the editing icon softkeys and the up and down arrows to set or change the Use the editing icon softkeys and the up and down arrows to set or change the
5 5
alarm limit. alarm limit.
6 6 Press Enter to record that value and to move to the 1/0 radio button. Press Enter to record that value and to move to the 1/0 radio button.
Press Enter again to insert a bullet in the 1/0 radio button. This alarm is now Press Enter again to insert a bullet in the
7 7
enabled at the alarm limit you have selected. enabled at the alarm limit you have selected.
Printing Sampling and Alarm Parameters Printing Sampling and Alarm Parameters
The current sampling setup and alarm settings can The current sampling setup and alarm settings can be printed from the Status
Screen. Screen. From From the the main main display
Screen. Screen. Then Then select select the the
LASAIR II II Operator's LASAIR
the directional arrow buttons on
the list of variables.
1/0 radio button. This alarm is now
display screen, screen, select select the the
button to to print button print the the sampling
Operator's Manual Manual
Min or Max field.
be printed from the Status
button to to get button get to to the the Status
sampling parameters. parameters.
Status